Topcom BUTLER 5070 - Manual (Page 84)

84
Butler 5070
- Select OPT.
- Select NEW by using the UP- and DOWN keys.
- Press OK to confirm.
- Enter the new MSN number NEW:
- Press OK to confirm.
- Press ESC to leave the setting.
8.2.1.2. Editing an MSN number.
- Press MENU when the unit is in standby mode..
- Select BASE SETTING by using the UP- and DOWN keys.
- Press OK to confirm
- Enter the Base Pin code BS_PIN?:
- Press OK to confirm.
- Select MSN by using the UP- and DOWN keys.
- Press OK to confirm.
- Select MSN LIST by using the UP- and DOWN keys.
- Press OK to confirm.
- You can see the list of telephone numbers MSN´s assigned to the Base Station.
(If no MSN number is added, the list shows EMPTY).
- Select the desired MSN number by using the UP- and DOWN keys.
- Select OPT. (option)
- Select EDIT by using the UP- and DOWN keys.
- Press OK to confirm.
- Edit the selected MSN number by means of the numerical keypad (press C to erase a digit)
- Press OK to confirm.
- Press ESC to leave the setting.
8.2.1.3. Removing an MSN number.
- Press MENU when the unit is in standby mode..
- Select BASE SETTING by using the UP- and DOWN keys.
- Press OK to confirm
- Enter the Base Pin code BS_PIN:?
- Press OK to confirm.
- Press OK to confirm.
- Select MSN by using the UP- and DOWN keys.
- Press OK to confirm.
- Select MSN LIST by using the UP- and DOWN keys.
- Press OK to confirm.
- You can see the list of telephone numbers MSN´s assigned to the Base Station.
(If no MSN number is added, the list shows EMPTY).
- Select the desired MSN number by using the UP- and DOWN keys.
- Select OPTION
- Select DELETE by using the UP- and DOWN keys.
- Press OK to confirm.
- The display will show SURE?
- Press OK to confirm.
- Press ESC to leave the setting.
8.2.2. CLIR (Calling Line Identification Restriction)
You can decide if the telephone MSN number shall be sent out to the caller or not (feature CLIR – must
be supported from the network operator).