Topcom BUTLER 5070 - Manual (Page 78)

- Press OK to confirm, the selected name and/or number is displayed again.
- Press OK to re-confirm and go back to the Phonebook.
- Press ESC to leave the phonebook.
6.6. Erasing all numbers and name from the Phonebook
- Press the PHONEBOOK button when the unit is in standby mode..
- Press OPT.
- Select DELETE ALL by using the UP- and DOWN keys.
- Press OK to confirm, the display will indicate SURE?
- Press OK to re-confirm. EMPTY appears on the display or press ESC if you don’t want to erase all
entries.
- Press ESC to leave the phonebook.
6.7. Speed dial numbers
10 speed dial numbers can be assigned to a Stored number in the Phonebook. A phonebook number
will be stored under a number key.
6.7.1. Store speed dial number
- Press the PHONEBOOK button when the unit is in standby mode..
- Select entry to store as speed dial number via up and down keys
- Press OPT.
- Select SPEED DIAL and press OK
- Select NEW and press OK
- You now get an overview of the free speed dial keys: #: ----------
- Press a number key where to store this phonebook number (example key: 5 #: ----5----)
- Press OK key to confirm
- Press ESC to leave the phonebook
6.7.2. Recall speed dial number
- Press and hold the numeric key for 3 sec where you stored the speed dial number
- The stored number will be displayed
- Press LINE key to dial this number
7. HANDSET SETTINGS
7.1. Keypad Lock
- Press MENU when the unit is in standby mode..
- Select KEY LOCK by using the UP- and DOWN keys.
- Press OK to confirm
The display shows DIAL 080. The keypad is now locked.
After dialing 080,the keypad will be released.
7.2. Ringer volume
- Press MENU when the unit is in standby mode..
- Select RING SIGNAL by using the UP- and DOWN keys.
- Press OK to confirm.
- Select VOLUME by using the UP- and DOWN keys.
- Press OK to confirm.
78
Butler 5070