Toshiba SD-36VESE - Manual (Page 34)

34 - English
P
laying
B
ack
Searching for a
Specific Sequence
Each time you record a cassette on this DVD-VCR,
an “index” is automatically marked on the tape when
recording starts.
The Search function allows you to fast-forward or rewind
to a specific index and start playback from that point.
Depending on the direction selected, the indexes are
numbered as follows:
• This DVD-VCR uses a standard indexing system
(VISS). As a result, it will recognize any indexes
marked by other VCRs using the same system
and vice versa.
❚
Go To [0:00:00] Stop
Use this feature when you want to search for the 0:00:00
counter position on a cassette.
Press the CLEAR button at the point on the tape where
you want to set the counter to 0:00:00.
The VCR will rewind or fast forward, searching for the
0:00:00 counter position, and then automatically stop at
that position.
1 Press the MENU button, then press the … or †
button to select FUNC.
Press the OK or √ button.
The Function menu is displayed.
etc.
2 1 1 2
etc.
Prev
Seq. Seq. being
played
Next
Seq.
➔
2 Press the … or † button to select VCR Function,
then press the OK or √ button.
The VCR Function menu is displayed with the Go
To [0:00:00] selected.
• It can be displayed simply by pressing the
SEARCH button.
3 Press the OK or √ button again.
❚
End Search
Use this feature when you want to search for a blank
position to record a program on a cassette.
The VCR will fast forward, searching for a blank position,
and then automatically stop at that position.
If the VCR reaches the end of the tape during end
search, the tape will be ejected.
1 Press the SEARCH button.
The VCR Function menu is displayed.
Press the … or † button to select End Search.
2 Press the OK or √ button.
SETUP
DVD
VCR
PROG
FUNC
Function
DVD Function √ √
VCR Function √ √
OK RETURN MENU
SETUP
DVD
VCR
PROG
FUNC
VCR Function
Go To [0:00:00]
End Search
Intro Scan
OK RETURN MENU
SETUP
DVD
VCR
PROG
FUNC
VCR Function
Go To [0:00:00]
End Search
Intro Scan
OK RETURN MENU