Toshiba SD-36VESE - Manual (Page 14)

14 - English
S
ettings
S ettings
Tuning Your Television
for the DVD-VCR
You must tune your television for the DVD-VCR only
if you are using the RF cable.
To view pictures from your DVD-VCR when a Scart
cable is used, the television must be set to the
audio/video mode (AV).
1 Switch on the television.
2 Switch on the DVD-VCR by pressing the
/I ON/STANDBY on the front of the DVD-VCR
or ON/STANDBY on the remote control.
3 Select a programme position on the television
to be reserved for use with your DVD-VCR.
4 Insert the video cassette in the DVD-VCR.
Check that the DVD-VCR starts reading the
cassette; if not, press the √II button.
5 Start a scan on your television or set the
television to UHF channel 36.
6 Fine tune the television until the pictures and
sound are obtained clearly.
7 When the picture and sound are perfectly clear,
store this channel at the desired programme
position on the television.
That programme is now reserved for use with
your DVD-VCR.
• Tuning Your Television for the DVD-VCR . . 14
• Setting the Date and Time . . . . . . . . . . . . . . 15
• Setting the Menu Language . . . . . . . . . . . . . 16
• Presetting the Stations Automatically . . . . . 16
• Presetting the Stations Manually . . . . . . . . . 18
• Clearing a Preset Station . . . . . . . . . . . . . . . 19
• Changing the Preset Station Table . . . . . . . . 20
• Selecting the RF OUT Sound Mode (B/G-D/K) . 21
• Setting the VCR Output Channel . . . . . . . . . 21