Toshiba SD-36VESE - Manual (Page 23)

English - 23
VCR F
unctions
NICAM
NICAM programmes are divided into 3 types. NICAM
Stereo, NICAM Mono and Bilingual (transmission in
another language).
NICAM programmes are always accompanied by a
standard mono sound broadcast and you can select the
desired sound. Please refer to page 33.
1 Press the MENU button, then press the OK or √
button.
2 Press the … or † button to select User Set, then
Press the OK or √ button.
The User Set menu is displayed.
3 Press the … or † button to select NICAM, then
press the OK or √ button to select On or Off.
• On (for NICAM mode):
Normally set at this position
• Off (for MONO mode):
Only set at this position to record the standard
mono sound during a NICAM broadcast if the
stereo sound is distorted due to inferior
reception conditions.
SETUP
DVD
VCR
PROG
FUNC
Setup
Language : English √ √
Clock √ √
Install √ √
User Set √ √
Auto Power Off : Off √ √
Screen Messages : On √ √
OK RETURN MENU
SETUP
DVD
VCR
PROG
FUNC
User Set
Colour System : Auto √ √
NICAM : On √ √
IPC : On √ √
OK RETURN MENU
Intelligent Picture
Control
This feature allows you to adjust the sharpness of the
image automatically, according to your own preferences.
1 During playback press the MENU button, then
press the OK or √ button.
2 Press the … or † button to select User Set, then
press the OK or √ button.
The User Set menu is displayed.
3 Press the … or † button to select IPC (Intelligent
Picture Control), then press the OK or √ button to
select IPC option.
• You can select the modes simply by pressing
the IPC button.
4 To adjust the sharpness manually, press the
† button to turn the IPC mode OFF.
The sharpness of the picture is adjusted
manually.
Press the œ or √ buttons until the picture is
displayed according to your preferences.
SETUP
DVD
VCR
PROG
FUNC
User Set
Colour System : Auto √ √
NICAM : On √ √
IPC : On √ √
OK RETURN MENU
❉ ❉ PICTURE ❉ ❉
IPC : OFF
SOFTEN SHARPEN
œ œ √ √ ON/OFF † †
❉