Toshiba SD-36VESE - Manual (Page 19)

English - 19
S
ettings
Clearing a Preset
Station
If you have stored a TV station:
• That you do not require
• At the wrong programme position, you can cancel it.
1 Press the MENU button, then press the OK or
√ button.
2 Press the … or † button to select Install, then
press the OK or √ button.
The Install menu is displayed.
3 Press the … or † button to Select Manual
Setup, then press the OK or √ button.
The TV STATION TABLE menu is displayed.
4 Press the … or † button to select required
preset TV station.
Press the CLEAR button to delete.
5 Repeat the same procedure from step 4
onwards until all the required stations have
been cleared.
SETUP
DVD
VCR
PROG
FUNC
Install
Auto Setup √ √
Manual Setup √ √
TV System :G √ √
VCR Output CH :CH36 √ √
OK RETURN MENU
❉ ❉ TV STATION TABLE ❉ ❉
PR CH NAME DEC
1 021 - - - - OFF
2
3
4
5
… …† † √ √ SWAPPING : OK
DELETE : CLEAR RETURN
8 Press the … or † button to select NAME.
The station name is set automatically from the
broadcast signal.
•To change the programme’s name, press the
√ button. The first letter of the name flashes.
9
10 Repeat this procedure from step 4 onwards,
until all the required stations have been stored.
11 Press the MENU button to exit the menu.
❉ ❉ MANUAL TUNING ❉ ❉
PR : 1
CH : 021
MFT : -
DECODER : OFF
NAME
: - - - -
… …† † œ œ √ √ MEMORY : OK
RETURN
Select a character
in the name
Move to the next
previous or
character
Press the …, †button until the
required character is displayed
(letters, numbers or “-” character).
Press the œ or √ button
respectively.
To... Then...
If you... Then...
Wish to store the
station displayed
Do not wish to
store the station
displayed
• Press OK to store the station.
• Press the … or † button until the
CH is selected.
• Press the œ or √ button to go on
scanning the frequency band and
display the next station.