Setting up the audio options – Toshiba D-VR3SG User Manual
Page 20
English
- 39
38 -
English
Allow you to setup the Audio device and sound status
depending on the audio system in use.
Note
Note
Digital Output
Setting Up the Audio
Options
Use the
buttons to select the desired item.
Then press the
or OK button.
1. PCM :
Converts to PCM(2CH) 48kHz audio.
Select PCM when using the
Analogue Audio Outputs.
2. Bitstream :
Converts to Dolby Digital/MPEG
Bitstream (5.1CH). Select Bitstream
when using the Digital Audio Output.
DTS
1. Off :
Doesn’t output digital signal.
2. On :
Outputs DTS Bitstream via digital out-
put only. Select DTS when connecting
to a DTS Decoder.
Dynamic Compression
1. On :
To select dynamic compression.
2. Off :
To select the standard range.
5
Press the RETURN or
¥
button to return to
the previous menu. Press the MENU button to
exit the menu.
When DTS soundtrack is played, sound does
output from Analog Audio Output.
With the DVD in Stop mode, press the MENU
button on the remote control.
1
Select “Setup” using
buttons, then press
the
or OK button.
2
Select “Audio” using
buttons, then press
the
or OK button.
Audio setup menu will be displayed.
3
PCM
Bitstream
Programme
Use
buttons to select the desired sub menu
and press the
or OK button.
4
Programme
With the DVD in Stop mode, press the MENU
button on the remote control.
1
Select “Setup” using
buttons, then press
the
or OK button.
Select “Language” using
buttons, then
press the
or OK button.
Language setup menu will be displayed.
3
Programme
2
On-Screen Menu
Programme
Use
buttons to select the “On-Screen
Menu” and press the
or OK button.
4
Press the
or OK button.
• On-Screen Menu is selected and the screen
returns to Language Setup menu.
6
Use the
buttons to select On-Screen Menu
Language.
5
Audio
Subtitle
: Automatic
: Original
Disc Menu
On-Screen Menu
English
Français
Deutsch
Español
Italiano
Nederlands
Language
Programme
S
ystem Setup
S
ystem Setup