Transcend Information T.SONIC 320 - Manual (Page 29)

Connecting to a Computer︱
If you are using Windows Media Player 10 and want to play WMA-DRM10 music files, you
must set the MP320’s Music Transfer Mode to MTP to transfer and synchronize music files
between the computer and your MP320.
Transferring Files to the MP320
If you want to use your MP320 to listen to music other than the Radio, you must transfer MP3, WMA, or
WMA-DRM10 music files to the player. When the MP320 is connected to a computer it is locked into
transferring files
. You will not be able to play or record any music at this time. Please disconnect your MP320
from the computer when you want to use the player.
1.
Remove the MP320’s cap and plug its USB connector directly into an available USB port on your
desktop or notebook computer. While the MP320 is connected to a computer, it can only be used for
transferring files. The MP320’s rechargeable Li-ion battery will begin charging.
Figure 5. Connecting to a Computer
ected to a computer the MP320’s screen will display a “READY” messag
be loaded onto the player.
2. When conn e, indicating that
files can
ou cannot play or record music when the MP320 is connected to a computer
If you are using Windows® a new Removable Disk drive with a newly assigned drive letter representing the
Y .
MP320 will appear in the My Computer window.
29