Trango Broadband M900S - Manual (Page 13)

Getting Started
Trango Broadband Wireless — User Manual M900S Rev. C Page 9
Example (to view a list of all commands which start with su)
#> ? su
su [all | ]
su info
su linktest
su password
su ping
su reboot
su sw
su testrflink
su testrflink
sudb add
sudb cirmir <|all>
sudb defaultcirmir [ ]
sudb delete <|all>
sudb dload
sudb gid <|all> <0..15>
sudb view
survey
NOTE: The majority of the CLI commands will be covered throughout this text as well as in Appendix A −
Command Set Reference.
Troubleshooting
If you can not telnet into the radio or open a browser session, check cable connections, ensure proper use of cross-
over vs. straight-through cable, and ensure PC’s subnet is routable to radio’s IP address. If you still cannot access
the radio’s management interfaces, consult the troubleshooting guide that is available at
www.trangobroadband.com in the Technical Support area of the website.