Toshiba B-SX6T Series - Manual (Page 17)

2. PRINTER SETUP ENGLISH VERSION EO1-33056
2.3 Connecting the Power Cord
E2- 3
2.3 Connecting the
Power Cord
1. Make sure that the printer Power Switch is in the OFF ({) position.
Connect the Power Cord to the printer as shown in the figure below
2. Plug the other end of the Power Cord into a grounded outlet as shown
in the figure below.
[Example of US Type] [Example of EU Type]
Power Cord
Power Switch
Power Cord Power Cord
CAUTION!
As a Power Cord is not supplied
with the printer, please purchase
an approved on that meets the
safety standard of each country.
(Refer to APPENDIX 3.)