Toshiba B-SX6T Series - Manual (Page 102)

4. MAINTENANCE ENGLISH VERSION EO1-33056
4.1 Cleaning
E4- 4
4.1.2 Pinch Roller (Cont.)
12. Attach the Ribbon End Sensor Plate to the printer.
(1) Engage the notches on the both sides of the Ribbon End Sensor
Plate with the Positioning Pins of the printer.
(2) Fit the tip of the Pinch Roller Plates into the slot in the Ribbon
End Sensor.
Notch
Ribbon End
Sensor Plate
Positioning Pin
Positioning Pin
Slot
Pinch Roller Plate
Ribbon End Sensor Plate
Slot