Topcom COCOON 400 - Manual (Page 83)

If you select ‘AUTO’ the handset will automatically search for another base when
you are out of range!
6.5. ROOM MONITORING
When more than one handset is registered, one of the handsets can be used as a
(baby) monitor device.
To activate this function:
1. Enter the menu by pressing MENU.
2. Select MONITOR.
3. Press OK.
4. Select ON.
5. Press OK.
The display will show Monitor (blinking) on the handset when room monitoring is
activated. Another handset can call this handset (internally), which will activate the
microphone on this handset. That way, you can monitor every sound in that room.
Note: The handset in monitor mode will not ring when an external call comes in.
To deactivate this function:
1. Enter the menu by pressing MENU.
2. MONITOR is shown.
3. Press OK.
4. Select OFF.
5. Press OK.
ENGLISH
83
Cocoon 400
HANDL. C400_euro.qxd 27-08-2002 09:25 Page 83