Topcom COCOON 400 User Manual
Page 82
The icon
and the text "NOT REG" flashes on the display when the handset is
not associated with the base.
When a handset is associated with a base, it is attributed a handset number by the
base. It is the number displayed on the handset behind the name and must be
used for internal calls.
6.2 REMOVING A HANDSET
You can remove a handset from a base to allow another handset to be registered:
1
Enter the menu by pressing MENU.
2
Select BASE.
3
Press OK.
4
Select PIN PROT.
5
PRESS OK.
6
Enter PIN-code (0000).
7
Press OK.
8
Select DEL HS.
9
Press OK.
10. Select the handset to be cancelled.
11. Press OK to validate.
12. CONFIRM will appear. Press OK again to confirm or
to return.
A double bleep confirms the validation of your choice.
A long bleep signifies that the modification has not been taken into account.
6.3 SETTING UP A HANDSET ON ANOTHER BASE
You wish to use a Cocoon 400 handset with a base of another model. The base
must be GAP compatible.
1. To put the base in registration mode, refer to the base user manual.
2. Carry out operations 3 to 10 from paragraph 6.1. Setting up an additional
handset.
Each handset attributes a number from 1 to 4 the base it is associated with. By
default this number is 1.
6.4 SELECTING A BASE
The handsets can be registered to up to 4 bases simultaneously.
To change the base, select "B SELECT" in the menu. Select the base option:
AUTO:
To choose the best base
FIXED:
Choose a particular base. The handset will not search for another
base when going out of range.
PREFER:
Start with searching a particular base first and then the others when
going out of range.
And press OK.
When selecting FIXED or PREFER, the display shows ‘BS1 2 3 4’. The current
registered base will blink. Press 1-4 to select the base.
82
Cocoon 400
HANDL. C400_euro.qxd 27-08-2002 09:25 Page 82