Topcom COCOON 400 - Manual (Page 68)

3. USING THE TELEPHONE
3.1 HANDSET ON/OFF
• Turn ON handset: Press OK key for 2s. The handset will search the base.
• Turn OFF handset: Press OK key for 2s. The display will go OFF.
3.2 RECEIVING A CALL
When receiving an external call, all handsets including the base unit will ring. The
EXT icon will appear on the display and the
LED will flash on the base.
When the handset rings, press to answer. You are then connected to your
correspondent. If the handset is lying on the base when the telephone rings, you
just need to pick up the handset to answer the call (if the option autoanswer is set
to ON: See 4.9. Automatic answer).
If you press when the telephone rings, you pick up the line and automatically
change to handsfree mode.
3.3 MAKING AN EXTERNAL CALL
Normal numeration:
1. Press .
2. Enter telephone number.
Block dialling:
1. Dial your correspondent’s number.
2. Press .
To correct a number use the key to delete an entered digit.
3.4. MAKING AN INTERNAL CALL
Only possible when more than one handset is registered to the base!!
Normal numeration:
1. Press INT.
2. Enter the number of the internal handset (1 to 5).
Prenumération:
1. Enter the number of the internal handset (1 to 5).
2. Press INT.
3.5 HANDSFREE MODE
You can converse with your correspondent without picking up the handset.
To activate or deactivate the handsfree mode, press the
key during a call.
68
Cocoon 400
HANDL. C400_euro.qxd 27-08-2002 09:25 Page 68