Tektronix TekConnect Probe Interface Module 80A03 - Manual (Page 36)

Maintenance
26 80A03 TekConnect Probe Interface Module Instruction Manual
The following conditions indicate an internal failure. See page vi for information
on contacting Tektronix for service.
H No LED activity at power on.
H LEDs are inactive on a single channel.
H LED response is inconsistent when connecting the same probe alternately to
both channels.
Replacing Parts
Refer to the Replaceable Parts section on page 27 for a list of customer
replacement parts.
Repackaging for Shipment
If the original packaging is unfit for use or not available, use the following
packaging guidelines:
1. Use a corrugated cardboard shipping carton having inside dimensions at least
one inch greater than the probe dimensions. The box should have a carton
test strength of at least 200 pounds.
2. Put the probe into an antistatic bag or wrap to protect it from dampness.
3. Place the probe into the box and stabilize it with light packing material.
4. Seal the carton with shipping tape.
Product Requires Service