Toshiba TEC SL-9000-ESB-X SERIES - Manual (Page 42)

11-17
11. PROGRAMMING PROCEDURES
11.5 PLU VERIFYING LABEL
11.10 PLU VERIFYING LABEL
Menu Group: 1
Item No.:
12
PLU data stored in the scale are verified in the following procedure.
NOTES:
1. Labels are printed in both batch mode and on-demand mode.
2. When no PLU is stored in the selected range, an error occurs when the
ENTER key is pressed.
3. Pressing the CLEAR key releases the scale from the error mode and returns to the initial status
of this menu.
4. After clearing a paper jam error, the scale will wait for an entry of PLU# again.
1 0 0
1
1 0 0 1 0 8
12
NEXT
PLU
ENTER
CLEAR PROG.
ESC.
ENTER
The
confirmation
label is issued.
Group 1
Main
g
g
Set the entire PLU#.
Set the individual PLU#. (Ex. PLU #100)
Set the block PLU#. (Ex. PLU #100~199)
Set the zone PLU#. (Ex. PLU #100~108)
To interrupt
label issue. To resume label issue
which has been interrupted.
PROG.