Toshiba CS4000B Series - Manual (Page 4)

D4134844A
Avoid
Do NOT supply any power other than specified.
This device is designed to work only under specified voltage. Do NOT
attempt to supply the device with power other than specified. Supplying
the device with unspecified power invites a fire or an electric shock hazard.
●Handling Precautions
DANGER
Avoid
Do NOT place the device unstably.
Do NOT place the device on an unstable table, sloped ground, etc.. Make sure that the
device do not fall nor roll over to prevent an accident.
Avoid
Do NOT place any potentially-hazardous things on this device.
Do NOT place any things on the device which may, if it gets into the inside of the body,
damage the inner parts of the device (such as a flower pot, glass, cosmetics, a container
filled with liquids or chemicals, as well as small metal parts, etc.). If tumbled, the
liquids inside the bottle, etc. may get into the chassis, causing a fire or an electric shock
accident.
Avoid
Do NOT insert any foreign object through air-vent
Avoid inserting any foreign object, especially metal part, combustible, through
ventilation slits. To do so may cause a fire or an electric shock accident.
Avoid
Do NOT damage the power cord.
Do NOT damage, break, re-process, nor bend forcefully the power cord. Pulling
forcefully/Twisting/Placing a heavy object on/Applying heat on the cord should also be
avoided. Otherwise, the cord may be damaged, causing a fire or an electric shock
accident. If the cord is damaged, contact us or our dealer/distributor from which you
purchased this device for repair service.
Avoid
Do NOT remove the protective cover
Avoid removing its protective cover. If you touch the inner high-voltage part, you might
get an electric shock. For inner part/circuit checkup, maintenance, or repair, contact us
or the dealer/distributor from which you purchased this device.