Toshiba WLT68 - Manual (Page 31)

31
PC settings – picture position, clock phase,
sampling clock, reset, PC media windows
3
3 Use
S or R to adjust until the picture clears.
In the SET UP menu press Q until PC Setting is
highlighted.
Press OK to select, then Q to highlight Clock
phase
.
Use
S or R to adjust until the picture clears.
1
2
The Clock phase matches the PC signal with the LCD
display. Adjusting this can clear horizontal stripes and
picture blur.
Clock phase
In the SET UP menu press Q until PC Setting is
highlighted.
Press OK to select, then Q to highlight Sampling
clock
.
1
2
Adjusting the Sampling clock alters the number of pulses
per scan, this will clear vertical lines on the screen.
Sampling clock Picture position
Connect the PC (as shown in the ‘Connecting a PC’
section) and ensure that a picture is showing on the
television screen. The picture position may now be
adjusted to suit personal preference.
Press B to select PC, then select PC Setting
from the SET UP menu.
1
Press OK. Press P and Q to select an option,
then
S or R to adjust the settings.
2
3
In the SET UP menu press Q until PC Setting is
highlighted.
Press OK to select, then Q to highlight Reset.
Press OK.
1
2
To return to the original factory settings.
Reset
Press and hold { , select PC Media Windows
and press OK. The screen will show the picture
from a connected PC and the last broadcast
channel being viewed.
1
This features splits the screen allowing a broadcast
programme to be viewed at the same time as a
connected PC.
PC Media Windows
SET UP
Language English
Country UK
AV connection OK
PC Setting OK
MENU Back EXIT Watch TV
1/2 PC Settings
Horizontal position 0
Horizontal width – 5
Vertical position 0
Vertical height – 5
Clock phase 0
Sampling clock 0
MENU Back EXIT Watch TV
1/2 PC Settings
Horizontal position 0
Horizontal width – 5
Vertical position 0
Vertical height – 5
Clock phase 0
Sampling clock 0
MENU Back EXIT Watch TV
g p g