Toshiba C-DR0101 User Manual

Page 35

Press

Block Block Block Block

Playback

Block

Playback direction

Press

while in Playback Pause mode.

2. Pressing the Pause key (

) again returns the Digital Video Recorder to the playback mode it was last in

before playback was suspended.
The illuminated Pause key extinguishes and the Playback key lights.

11.5.4. Forward Frame Playback and Reverse Frame Playback

If the Playback key (

) or Reverse Playback key (

) is pressed while in Playback Pause mode, Forward or

Reverse Frame playback can be performed.

Pressing the key once performs a single-frame playback per screen, while holding down the key provides a
continuous frame-by-frame playback.

11.5.5. Forward Block Playback and Reverse Block Playback

In the Digital Video Recorder, recorded data from the start to the end of each recording is handled as a single
recorded block. Since both the Forward Block Playback and Reverse Block Playback functions shift playback
images on a block basis, desired scenes can be searched while viewing playback images.

Pressing the (+) Block Shift key during playback shifts the recorded image to the head of the next block,
temporarily stopping playback for 1 second before it is restarted. If the (+) Block Shift key is pressed again
while in Playback Pause mode, the recorded image is shifted to the next block, providing the same operation.

Pressing the (–) Block Shift key during playback shifts the recorded image to the head of the block currently
played back, temporarily stopping playback for 1 second before it is restarted. If the (–) Block Shift key is
pressed again while in Playback Pause mode, the recorded image is shifted to the head of the preceding
block and then it is played back.

Block shift is also possible during Reverse Playback operation, however playback resumes in the forward
direction after the recorded image has been shifted to the head of the desired block.