Toshiba C-DR0101 - Manual (Page 18)

18
* The underlined contents are factory-preset values.
• Move the cursor with the ( ) or ( ) key, and change setting values
with the ( – ) or ( + ) key.
• Confirm the setting with the Menu key, and return to the previous
screen.
• Each setting item and its setting value and contents are as shown in
the table below.
Setting Value Contents Setting Item
DATE
(Recording Start
Date)
TIME
(Preset Times)
PICTURE QUALITY
AUDIO
REC INTERVAL
(Recording Intervals)
REC PATTERN
(Recording Pattern)
MOTION DETECT
PTN (Motion
Detection Pattern)
DAILY : Designates the Internal Timer Recording date. Timer
schedules can be set for any time between the current time to
one year ahead. The day of the week is automatically
displayed. Programs are automatically deleted after their
preset times are reached.
WEEKLY: Designates two or more days of the week. If all days from
Sunday to Saturday are designated, recording is performed
every day.
CANCEL : Cancels preprogrammed settings.
Designates the timer operating period in minutes. If the same timer preset
time is duplicated, the "TIME SETTING ERROR" indication is displayed
on the screen to the right side of the program number, invalidating the
date setting. In such cases, correctly reset the time. Note that the timer
operating period cannot be set unless the complete time (hour and
minute) is entered.
LEVEL1 : Angle of view 720 x 240 file size : 64KB (High Picture Quality)
LEVEL2 : Angle of view 720 x 240 file size : 40KB
LEVEL3 : Angle of view 720 x 240 file size : 32KB
LEVEL4 : Angle of view 720 x 240 file size : 24KB
LEVEL5 : Angle of view 720 x 240 file size : 16KB
(Standard Picture Quality)
ON: Records audio sound simultaneously during recording.
OFF: Records no audio sound during recording.
Designates the Recording intervals.
Setting the Disk Setting’s Disk Mode to "MIRRORING" limits the
maximum recording interval to 1/30 second. Even if set to "1/60 SEC," the
actual recording interval is 1/30 second, and the "1/30 SEC" indication is
displayed on the screen (C-DR0101, C-DR0105)
Transmits a Pattern Selection command from the RS-232C connector
when the preset timer operating time is reached.
Transmits a Pattern Selection command from the RS-232C connector
when the preset timer operating time is reached.
DAILY / WEEKLY / CANCEL
LEVEL1 / LEVEL2 / LEVEL3 /
LEVEL4 / LEVEL5
ON / OFF
1/60SEC / 1/30SEC / 1/15SEC /
1/10SEC / 1/5SEC / 1/3SEC /
1/2SEC / 1SEC / 2SEC / 3SEC /
5SEC /10SEC / 20SEC / 30SEC /
60SEC
1 / 2
1 / 2
T I M E R S E T T I N G 0 1
D A T E
[ D A I L Y ] T H U J A N / 0 1 / 0 4
T I M E 0 0 : 0 0 – 1 0 : 0 0
P I C T U R E Q U A L I T Y [ L E V E L 3 ]
A U D I O [ O N ]
R E C I N T E R V A L [ 1 / 3 0 S E C ]
R E C P A T T E R N [ 1 ]
M O T I O N D E T E C T P T N [ 1 ]
Timer Schedule Screen Settings
Note
Pattern 1 command of both the Recording Pattern and Motion Detection Pattern is transmitted from the RS-
232C connector at times other than timer set times such as power-on, after Internal Timer Recording
completion, and during General Recording.
Recording Pattern and Motion Detection Pattern are functions available to the Multi-switcher (C-MS91D, C-
MS161D). For more information on these functions, refer to the instruction manual for the Multi-switcher.
Program No