Hard drive array, Swapping a hard drive – Toshiba NVR16-X User Manual
Page 23
13
HARD DRIVE ARRAY
NOTE: The Alarm Light will turn on if the Hard Drives reach a temperature above safe operating conditions
Swapping a Hard Drive
1. Press the hard drive power button to turn off power to
the hard drive you wish to remove.
2. Turn the button lock to the open position and push the
handle release button.
3. Pull the lever outward while removing the hard drive.
Reverse steps to install.
LOCK
OPEN
LOCK
OPEN
LOCK
OPEN
LOCK
OPEN
Alarm Light
Hard Drive
Power Buttons
Reset Button
Release Handle
Button Lock
Handle Release
This manual is related to the following products: