Toshiba 20HL85 - Manual (Page 27)

27
Introduction
Connecting your TV
Setting up your TV
Using the TV
’s Features
Appendix
INPUT DISPLAY
INPUT DISPLAY
Locking the video inputs
With the VIDEO LOCK feature, you can lock out the input sources
(VIDEO1, VIDEO2, COLORSTREAM HD, HDMI, PC) and channels 3
and 4. You will not be able to select the input sources with the INPUT
button or Channel buttons unless you clear the setting.
To set up the video lock:
1. Press TV to select the TV mode.
2. Press MENU, then press or to display the LOCKS menu.
3. Press
▲ or ▼ to display the password entering mode.
4. Use the Channel Number buttons (0-9) to enter your password,
then press ENTER. The LOCKS menu appears.
5. Press ▲ or ▼ to highlight VIDEO
LOCK.
6. Press or to select:
• OFF: Unlocks all video input
sources.
• VIDEO: Locks VIDEO1, VIDEO2,
COLORSTREAM HD, HDMI, PC.
• VIDEO +: Locks VIDEO1, VIDEO2, COLORSTREAM HD,
HDMI, PC, channel 3 and channel 4. This option should be used
if you use the antenna terminal to play a video tape.
7. Press EXIT to return to normal viewing.
Note:
After programming VIDEO LOCK, change
channels or press the INPUT key before
turning off the television.
L O C K S
L O C K
C H L O C K
V I D E O L O C K
G A M E T I M E R
: S E L E C T : A D J U S T
O F F
O F F
O F F / V I D E O / V I D E O +
C H L O C K : C H 0 0 2
S E T / C L E A R T V C A B L E
L O C K E D C H
0 0 0
0 0 0
0 0 0
R E T U R N
: S E L E C T : A D J U S T
E N T E R : S E T
Menu/
Enter
Exit
Channel
Numbers
INPUT
L O C K S
L O C K
C H L O C K
V I D E O L O C K
G A M E T I M E R
: S E L E C T : A D J U S T
O F F
O F F
Locking channels
With the CH LOCK feature, you can lock specific channels. You will not
be able to tune locked channels unless you clear the setting. You can
choose to lock up to nine TV channels and nine cable channels.
1. Press TV to select the TV mode.
2. Use the Channel Number buttons (0-9 and 100) to display the
television channel you wish to lock.
3. Press MENU, then press or to display the LOCKS menu.
4. Press
▲ or ▼ to display the password entering mode.
5. Use the Channel Number buttons
(0-9) to enter your password, then
press ENTER. The LOCKS menu
appears.
6. Press ▲ or ▼ to highlight CH
LOCK and press to display the
CH LOCK menu.
7. Press or to select the follow-
ing:
• SET– to set the channel as one
to be locked. Then press
ENTER.
• CLEAR– to clear all channels
from the list of locked channels.
Then press ENTER.
8. Repeat steps 1 through 7 to lock other channels. When you are
finished locking channels, press EXIT to return to normal viewing.
If you try to tune a locked channel, the TV will not display it, but will
display the nearest unlocked channel.
To unlock channels:
1. Press TV to select the TV mode.
2. Press MENU, then press or to display the LOCKS menu.
3. Press
▲ or ▼ to display the password entering mode.
4. Use the Channel Number buttons (0-9) to enter your password,
then press ENTER. The LOCKS menu appears.
5. Press ▲ or ▼ to highlight CH LOCK and press to display the
CH LOCK menu.
6. Press or to highlight CLEAR and clear all channels from the
list of locked channels. Press ENTER.
7. Press EXIT to return to normal viewing.
Note:
After programming CH LOCK, change
channels before turning off the television.
Menu/
Enter
Exit
Channel
Numbers
Using the TV
’s Features
Note:
If the remote control does not operate your TV,
press the “TV” button on the remote control
and try again.
TV
TV
J3U70101C(E)P25-29 15/06/2005, 4:11 PM 27