Telenetics DSP9612RM - Manual (Page 5)

Page 5
Chapter 1
Introduction
ongratulations for purchasing the finest industrial-grade fast-
poll rack-mount modem available.
The Telenetics DSP9612RM (Flash Poll) modem is a
9600/4800/0-1800 bps rack-mount modem designed for 4-wire, full-
duplex or 2-wire, half-duplex operation over a voice-band leased line.
The modem is designed utilizing the latest digital-signal processing
(DSP) technology to achieve high performance. The modem employs
Telenetics’ proprietary modulation and encoding scheme to achieve fast
modem training time. It is also backward compatible with Bell 202
modems.
The modem can be installed in either a Telenetics or a Motorola/UDS
RM16M Universal Data Shelf
. The modem occupies only one rack
slot, eliminating the hassle of equipment trays and power bricks
required for “Plastic Box” modems. The modem is powered from the
Universal Data Shelf.
The DSP9612RM modem is ideally suited for multi-point
communication systems that require fast response time, short training
time, and low throughput delay. The DSP9612RM is the most
technologically advanced rack-mount modem on the market.
This User’s Guide is designed to let you get your modem “up and
running” as quickly as possible. It contains all the information you need
to install and configure your modem. It also contains troubleshooting
information in the unlikely event you encounter a problem with your
modem.
C