Toshiba 32HLC56 - Manual (Page 17)

17
HLC56 (E/F) Web 213:276
Chapter 3: Using the remote control
Learning about the remote control
The buttons used for operating the monitor only are described
here. For a complete list of the remote control’s functions, see
the remote control functional key chart (- page 19).
Note: The error message “Not Available” may appear if you
press a key for a function that is not available.
1 POWER turns the monitor on and off. Press p to turn
on the monitor. The red LED indicator on the monitor’s
front panel will be illuminated. Press p again to turn off
the monitor.
2 FREEZE freezes the picture. Press again to restore the
moving picture.
3 SLEEP accesses the sleep timer ( - page 38).
4 PIC SIZE cycles through the pictures sizes: Natural,
TheaterWide 1/2/3, Full, and 4:3 HD (
- page 26).
5 INPUT selects the video input source ( - page 25).
6 VOL + – adjusts the volume level.
7 PIC MODE selects the picture mode (page 29).
8 RECALL displays the monitor’s setting information on-
screen (- page 39).
9 MUTE reduces or turns off the sound (- page 33).
10 Arrow buttons ( BbC c) When a menu is on-screen,
these buttons select or adjust programming menus.
11 ENTER activates highlighted items in the main menu
system.
12 MENU accesses the main menu system ( - page 23).
13 EXIT closes on-screen menus.
14 MODE SELECT Switch switches between TV,
CABLE/SAT, DVD, and VCR modes ( - page 18). Set to
“TV” to control the monitor.
263237HLC56_EN.book Page 17 Monday, June 5, 2006 3:46 PM