Tekxon Technology Still Camera K5 - Manual (Page 12)

11
You can check or proofread the version of the hardware and software of the camera.
Instructions how to install Mass storage driver and PC-camera driver.
Please read the following instruction carefully before installing driver program:
1. Please insert the software CD into the CD-ROM before connecting the camera to the computer,
( this CD is attached in the package ) and the install program will run automatically.( If the CD
could not run automatically, please double click Bdvdarun.Exe in the CD root folder )
2. Mass storage and PC-camera driver installation could be finished as the indication shown on the
screen.
Select the icon of
Install Windows ME/2000/XP Driver , the installation could be finished as
the indication shown on the screen.
Turn the camera into the PC-camera mode, connect the camera to the computer with the USB
cable attached in the package.
The computer could recognize the camera automatically and finish the setting. If the dialog box
appears
This installing program is not authorized by Microsoft, Go on or Not? , click the go
on installing to finish the installation.
If the operation system is windows98, please pull out the USB cable after the installation and turn
the PC mode to Mass storage, then connect it with the USB cable again. The system will identify
the camera automatically and also finish the setting. You can use the camera as a moveable
Flash Disk.
If there is something wrong with the automatic installation, you could also finish the installation
manually according to the guide to install the hardware. The corresponding driver program could
be found in the drivers/manual folder in the CD root folder. Pleaseread
Readme.txt help file
in this folder.
PC-Camera
Driver Installation