TMC EPIC ET4300 - Manual (Page 75)

Using the Data/Fax Jack
Additional Information
65
To connect a modem or a fax
machine to your Epic phone:
1 Simply plug your modem or fax machine
into the data/fax jack on the side of the
telephone.
For added convenience, you may connect
modems or fax machines to the telephone line
by plugging them into the data/fax jacks, which
are found on the right side of the Epic tele-
phones. Note that the data/fax jack is connect-
ed to Line 2.
The data/fax jack is found on the
right side of your Epic phone
Using the Network Services Button
To activate a Network Service:
1 While the phone is on-hook and idle,
press the NETWORK SERVICES
button.
- The display will read “Network
Services.”
2 Use the right and left arrow buttons
below the display to view the
Network Services list.
3 When the desired Network Service
is displayed, you may dial it simply
by lifting your handset, or pressing
DIAL , SPEAKER , or the HEADSET
button.
Use the NETWORK
SERVICES button for
easy access to
Telephone Company
network services
The NETWORK SERVICES button provides
easy access to Telephone Company network
services. All the needed feature codes are pre-
programmed in the telephone.
ET4300 UG for booklet old buttons v5 for PDF 021105.qxd 2/11/2005 2:56 PM Page 75