TMC EPIC ET4300 - Manual (Page 60)

To intercom another station:
1 Press the INTERCOM button, then
dial the two-digit station number of
the station you wish to intercom.
2 To end the conversation, hang up or
press the SPEAKER button.
To intercom another station while
you are on an outside call:
1 Press the INTERCOM button. The
outside call is automatically placed
on hold.
2 Place your intercom call the same
way as described above.
3 Press the LINE button of your out-
side call at any time to return to that
call.
Intercom Operation
50
Making Intercom Calls
You may place an intercom call by dialing the
two-digit station number of the desired station.
When you place an intercom call, your speaker-
phone turns on automatically.
If the called station is set to INTERCOM RING,
you may speak to the station as soon as they
answer.
If the called station is set to INTERCOM VOICE
or INTERCOM HANDSFREE, you may speak to
the station after you hear the confirming tone.
Note: If the intercom line is busy or the called
station is set to DO NOT DISTURB, you will hear
a no action tone.
Use the INTERCOM button and
the dialpad to make intercom
calls to other stations
ET4300 UG for booklet old buttons v5 for PDF 021105.qxd 2/11/2005 2:56 PM Page 60