Tascam DV-W11R - Manual (Page 28)

11.16 System Info
20 Rackmount DVD/CD Duplicator User’s Manual
11.16 System Info
The System Info function displays information for the interface board.
11.17 Quick Erase
The Quick Erase function performs a Quick Erase on DVD±RW discs.
11.18 Full Erase
The Full Erase function performs a Full Erase on DVD±RW discs. This function
takes longer than the Quick Erase.
12 Advanced Setup (Adv Setup)
The Advanced Setup functions enable you to modify the system configuration.
You should make changes only after you become completely familiar with the
functions in this menu.
To enter Advanced Setup mode, press the (ESC) button for two (2) seconds
until you hear a beep.
Then use the down arrow button to scroll through the various Advanced
functions. Press the (ENT) button to execute any of the Advanced functions.
To exit Advanced Setup mode, press the (ESC) button twice, then press the
down arrow button . The [1 Copy] command will appear on the LCD display.
12.1 UnderRun Protect
The UnderRun Protect setting turns Buffer UnderRun Protection on or off. The
default setting is ON .
12.2 Overburn
The Overburn setting turns the Overburn function in the target drive on or off. The
default setting is OFF .
For more information about Overburn discs, see item 5 in the FAQ on page 27.