Button/light/led indicators quick reference, Service information – Technicolor - Thomson Thomson CABLE MODEM User Manual
Page 33
44
Button/Light/LED Indicators
Quick Reference
* Actual button or LED names may vary per model.
Internet On/Off
Cable
Activity
Cable
Link
Message
PC Link Internet
INTERNET ON/OFF* – Turns the Internet connection ON and OFF for additional security. In
OFF mode, the CABLE ACTIVITY LED is also disabled. Do not press this button when transmitting
data over the internet. The information will be lost and your connection disabled.
INTERNET* – Indicates whether the Internet Connection is active.
PC LINK – Indicates whether the connection between the computer and the modem is active
(ready to transmit/receive) or actually transmitting/receiving. The light is off when no carrier is
present (or the modem is in standby mode), on when the carrier is present but there’s no
transmit/receive activity, and flashing when there is transmit/receive activity.
CABLE-LINK* – Indicates the status of your cable connection. The light is off when no cable
connection is detected and fully lit when the modem is registered with the network and data can
be sent.
CABLE ACTIVITY* – Indicates the existence of data traffic in the cable lines. The light is off
when no data traffic is present and flashing when data activity exists.
MESSAGE* – This light flashes when you have mail or message (if available through service
provider).
Service Information
If you purchased or leased your cable modem directly from your cable company, then warranty
service for the cable modem may be provided through your cable provider or its authorized
representative. For information on 1) Order Service, 2) Obtaining Customer Support, or 3)
Additional Service Information, please contact your cable company. If you purchased your cable
modem from a retailer, see the enclosed warranty card.
16500150 IB
12/6/04, 6:36 PM
44