Connecting the cable modem – Technicolor - Thomson Thomson CABLE MODEM User Manual
Page 23
21
Fig. 21
8.
When the “Completing the Found New Hardware Wizard” window appears, click “Finish” to
complete the process (Fig. 21).
9.
The Thomson cable modem installation is now complete. To validate a proper installation,
perform the following instructions:
•
Click on the “Start” icon in the lower left-hand corner of your screen.
•
Select “Settings,” followed by “Control Panel.” The “Control Panel” window will appear.
•
Double-click on the “System” icon, and select the “Device Manager.”
•
Scroll down the list until you come to “Network Adapters.” Double-click on “Network
Adapters.”
•
The “RCA or Thomson USB Cable Modem” should exist. If “RCA or Thomson USB Cable
Modem” does not exist, the cable modem was NOT installed correctly. Go to Solution 2 on
page 35.
Connecting the Cable Modem
16500150 IB
12/6/04, 6:36 PM
21