Connecting the cable modem – Technicolor - Thomson Thomson CABLE MODEM User Manual
Page 21
19
Connecting the Cable Modem
9.
The Thomson cable modem installation is now complete. To validate a proper installation,
perform the following instructions:
•
Click on the “Start” icon in the lower left-hand corner of your screen.
•
Select “Settings,” followed by “Control Panel.” The “Control Panel” window will appear.
•
Double-click on the “System” icon, and select the “Device Manager.”
•
Scroll down the list until you come to “Network Adapters.” Double-click on “Network
Adapters.”
•
The “RCA or Thomson USB Cable Modem” should exist. If “RCA or Thomson USB Cable
Modem” does not exist, the cable modem was NOT installed correctly. Go to Solution 2 on
page 35.
16500150 IB
12/6/04, 6:36 PM
19