11 setting call barring, 12 setting emergency number, 13 reset – Topcom BUTLER 4200 User Manual
Page 19

Topcom Butler 4200/Twin/Triple/Quattro
19
Topcom Butler 4200/Twin/Triple/Quattro
ENGLIS
H
5.11
Setting call barring
The call barring number can be set on any registered handsets through any registered
handset, the number can not be dialled out through the barred handsets if first digits of this
number are as same as the barring number.
1.
Enter the menu by pressing
.
2.
Select BASE using up
and down
keys.
3.
Press .
4.
Select BARRING using up
and down
keys.
5.
Press .
6.
Enter the PIN code (default =0000), 8 digits maximum.
7.
Press
to validate.
8.
Enter the handset number(1 to 4).
9.
Press
to validate.
10.
Select DISABLE, EXTERNAL or NUMBER using up
and down
keys, select
EXTERNAL to prohibit all external calls, only internal calls and the emergency call can
be made; select NUMBER to prohibit any external calls starting with the digits to be
entered.
11.
Enter the call barring number(max. 5 digits) or press Delete C key to delete.
12.
Press
to validate.
5.12 Setting emergency number
There are already 3 sets of emergency numbers stored inside the base in the factory, 2 sets
of additional number can be added, these numbers can be dialled out even if the barring is
set.
1.
Enter the menu by pressing
2.
Select BASE using up
and down
keys
3.
Press
4.
Select EMERGENCY using up
and down
keys
5.
Press
6.
Enter the PIN code (default =0000), 8 digits maximum
7.
Press
to validate.
8.
Select either one of two entries using up
and down
keys
9.
Enter the emergency number(max. 5 digits) or press Delete C key to delete
10.
Press
to validate
5.13 Reset
It is possible to return the phone to the original default configuration. This is the configuration
which was installed when you first received the telephone.
5.13.1 Base reset
1.
Enter the menu by pressing
2.
Select BASE using up
and down
keys
3.
Press
4.
Select DEFAULT using up
and down
keys
INT
OK
INT
OK
INT
OK
INT
OK
INT
OK
INT
OK
INT
OK
INT
OK
INT
OK
INT
OK