Names of the terminals on the rear panel, P.18, Names of each part on the document camara – Toshiba TLPXC2500 User Manual
Page 10: Preparations, Models with a document camera)
19
18
Preparations
Names of the terminals on the rear panel
(1)
(2)
(3)
(4)
(6)
(8)
(9)
(5)
(7)
COMPUTER 2 IN
(Y/P
B
/P
R
2)
/MONITOR OUT
Names of each part on the document camara
(models with a document camera)
Name
: Main Function
Camera
(1) LED illumination
: The illumination LED for referring documents.
(2) Focus ring
: Adjusts the focus.
(3) Camera lens
: The camera lens of the document camera.
(4) Camera arm
: Adjusts the camera angle.
(5) Infrared remote sensor
: Senses commands from the remote control.
Control Panel
(6) 50/60 Hz switch
: Matches the shutter speed of the camera to your power
system frequency.
(7) CAMERA button
: Switches between the camera input and the previous
input.
(8) CAMERA GAIN button
: Adjusts the camera gain.
(9) LOCK (W.BALANCE) indicator : Lights when the white balance has been locked.
(10) W.BALANCE button
: Switches between auto and locking of white balance.
(11) LED LIGHT button
: Switches on/off the LED illumination.
(1)
(2)
(3)
(4)
(6)
(5)
(7)
(8)
(9)
(10)
(11)
(8)
Name
: Main Function
(1) CONTROL terminal
: When operating the projector via a computer, connect
this to the controlling computer’s RS-232C port.
(2) AUDIO (L/R) terminal
: Input audio signals from video equipment.
(3) VIDEO terminal
: Input video signals from video equipment.
(4) S-VIDEO terminal
: Input S video signals from video equipment.
(5) AUDIO IN terminal
: Input audio signals from a computer, or from video
equipment with a component video signal output
terminal.
(6) COMPUTER 1 IN terminal
: Input RGB signal from a computer or other source or a
component video signal (Y/P
B
/P
R
) from video
equipment.
(7) AUDIO OUT terminal
: Outputs audio signals.
(8) COMPUTER 2 IN terminal
: Inputs RGB signal from a computer or other source or
(Also used for MONITOR OUT terminal)
a component video signal (Y/P
B
/P
R
) rom video
equipment. It can also be used as MONITOR OUT
terminal by the switch of (9).
(9) Switch
: Switches between COMPUTER 2 IN and MONITOR
OUT.