Toshiba Tosvert VF-MB1/S15 - Manual (Page 8)

E6581738 
- 6 -
2. Connection Information
This option allows the VF-MB1/S15 drive to be communicated with the cyclic command
transmission and monitoring of the original profile ("Vendor spec.", refer to Section 4) of
our company other than application profile "Profile for Variable Speed Drives PROFIdrive
(3.072), refer to Section 3" which PROFIBUS defines.
When you use VF-MB1, the shielding is connected to the drive ground. When you use
VF-S15, the shielding is connected to the grounding terminal of option adapter.
2.1. Exterior features
To align VF-MB1/S15 side-by-side horizontally, "Vertical" type PROFIBUS connector is
necessary.
Status LED indicator
(Refer to Section 2.2)
P ROFIBUS connector
(D-Sub 9pin)
Release Tab