Xplorer 870 – Topcom Xplorer 870 User Manual
Page 89
Xplorer 870
Setup DNS Relay
The default configuration for DNS Relay is disabled. While DNS Relay is enabled,
you can select "Auto-discovery" (This is only available while PPPoA/PPPoE is selected
for ATM PVC Configuration) or "Manual Setting" to assign remote DNS Server IP
address. (This is only available while RFC 1483 Routed or PPPoA/PPPoE is selected
for ATM PVC Configuration.). It is recommended to disable the DNS Relay and to
enter the DNS server addresses manually.
Note: To save the settings, select " Save Configuration" and then click " Save".
89
89
89
89
89
89
89
HANDL. XPL 870 scan 5/3/02 8:37 am Page 89