Toshiba B-852-TS12-QQ - Manual (Page 21)

2. PRINTER SETUP EO1-33029
2.7 Loading the Media
2-11
2.7.3 Loading Media into the
Printer
(Cont.)
10. After loading the media, don’t forget to move the Supply Holder
Unit to the forward notches of the Supply Roll Frame as shown
below.
11.
If you are using labels or thick tag paper, then it may be necessary to
increase the head pressure by Head Pressure Adjust Lever in the
figure below.
Head Pressure Adjust Lever Position
UP: Thin tag paper
DOWN: Label or Thick tag paper
Head Pressure
Adjust Lever
NOTE:
The head pressure increases
when the Head Pressure Adjust
Lever is lowered. When using
labels or thick tag paper, lower
the Head Pressure Adjust
Leve. If the print tone is light,
lower the Head Pressure
Adjust Lever even when using
thin tag paper.
Forward Notch
The Top Cover can be
opened during the
operation for control
purposes only. It should
be closed during normal
operation.
WARNING!