Tyan Computer GX21 - Manual (Page 93)

85
Power On Setup
Phoenix – AwardBIOS CMOS Setup Utility
Power On Setup
PWRON After PWR-Fail
This option defines the state of the system when power fails
and returns again. If On is selected, the system automatically
switches on when power is resumed. If Former-Sts is
selected, the system automatically switches on and restores
itself to the state it was last in when power failed. The choices
are:
On / Off / Former- Sts (Former Status)
Soft-off by PWR-BTTN
This option defines the time before the system powers off
when you press the Power Button. The two choices are:
Instant off / Delay 4 sec.
Wake Up by PCI Card
If enabled, this option awakens the system from a soft off
state with an input signal from PME on the PCI card. The
choices are:
Enabled / Disabled
PWRON After PWR-Fail
Soft-off by PWR-BTTN
Wake-Up by PCI card
Power On by Ring
Power On by Giga Lan
Resume by Alarm
X Date (of Month) Alarm
X Resume Time (hh: mm: ss)
Power ON Function
KB Power ON Password
Hot key Power ON
[off]
[Instant-off]
[Disabled]
[Disabled]
[Disabled]
[Disabled]
0
0: 0: 0
[BUTTON ONLY]
[Enter]
[Ctrl-F1]
Item Help
_________________________
Menu Level
XX
↑↓←→
: Move Enter: Select +/-/PU/PD: Value F10: Save ESC: Exit F1: General Help
F5: Previous Values F6: Fail-Safe Defaults F7: Optimized Defaults