Triax DVB 75SI - Manual (Page 4)

TRIAX DVB 75SI
4
,QWURGXFWLRQ
The TRIAX DVB75SI is an advanced digital satellite receiver based
on the latest technology.
In addition to support of DiSEqC functions for controlling switches
and LNBs for reception from more than one satellite position, the
DVB 75SI features OpenTV (version EN2) and an integrated
Electronic Programme Guide (EPG).
All functions are easy to set via the remote control and supported by
an extensive OSD (On-Screen-Display) screen-based menu system.
To be able to use the receiver you must have a suitable satellite dish
mounted and correctly adjusted to receive the desired satellite
positions.
The purpose of this User's guide is to ease the installation and use
of your Triax DVB 75SI satellite receiver:
• The User's guide uses the term 'satellite receiver' or 'receiver'
when referring to the Triax DVB 75SI.
• When preparing this User's guide, we particularly focused on
’Installation’ and ’Adjustments’. A glossary is available at the end
of this User's guide.
• Your new satellite receiver has already been pre-programmed
from factory. This enables you to get quick access to your
preferred programmes. However, new channels are constantly
being made available from the satellites and you may have to
make regular transponder searches to make sure that your
programme list is up to date.
• The satellite receiver is set to display Danish screen menu texts
as default. If you wish to change this or if you wish to change
other settings, please follow the instructions in chapter 4.
• In this User's guide all references to buttons on the remote
control are made with the printed number or symbol in square
brackets [ ]. The remote control button with the text ’P+’ will thus
be referred to as the [P+] button, and the button with the text
’menu’ will be referred to as the [menu] button, etc.
6XSSOLHGDFFHVVRULHV
1 RC75 remote control
2 batteries
1 user's guide
1 SCART cable (1 metre, fully connected)
1 telephone cable (10 metres)
1 mains cable