Tripp Lite PERIPHERAL SHARING B006-VUA4-K-R - Manual (Page 12)

12
Hotkeys
continued
Switching Audio Focus Only to a Desired Port
To switch only the Audio focus to a desired port, perform the following command:
1. Activate Hotkey Setting Mode using the aforementioned command.
2. Press and release the number key for the desired port (1, 2, 3 or 4).
3. Press and release the [S] key.
4. Press and release the [Enter] key.
Switching Audio Focus Only to the Next Port
To switch only the Audio focus to the next port, perform the following command:
1. Activate Hotkey Setting Mode using the aforementioned command.
2. Press and release the [S] key.
3. Press and release the [Enter] key.
Simultaneously Switching KVM and USB Focus to a Desired Port
1. Activate Hotkey Setting Mode using the aforementioned command.
2. Press and release the number key for the desired port (1, 2, 3 or 4).
3. Press and release the [K] key.
4. Press and release the [U] key.
5. Press and release the [Enter] key.
Simultaneously Switching KVM and Audio Focus to a Desired Port
1. Activate Hotkey Setting Mode using the aforementioned command.
2. Press and release the number key for the desired port (1, 2, 3 or 4).
3. Press and release the [K] key.
4. Press and release the [S] key.
5. Press and release the [Enter] key.
Simultaneously Switching USB and Audio Focus to a Desired Port
1. Activate Hotkey Setting Mode using the aforementioned command.
2. Press and release the number key for the desired port (1, 2, 3 or 4).
3. Press and release the [U] key.
4. Press and release the [S] key.
5. Press and release the [Enter] key.
201004198 93-2947.indd 12 4/23/2010 3:26:53 PM