Tripp Lite PERIPHERAL SHARING B006-VUA4-K-R - Manual (Page 11)

11
Hotkeys
continued
Simultaneously Switching KVM, Audio and USB Focus to a Desired Port
To simultaneously switch the KVM, Audio and USB focus to a desired port, perform the
following command:
1. Activate Hotkey Setting Mode using the aforementioned command.
2. Press and release the number key for the desired port (1, 2, 3 or 4).
3. Press and release the [Enter] key.
Simultaneously Switching KVM, Audio and USB Focus to the Next Port
To simultaneously switch the KVM, Audio and USB focus to the next port in line (1 to 2, 2
to 3, etc.), perform the following command:
1. Activate Hotkey Setting Mode using the aforementioned command.
2. Press and release the [Enter] key.
Switching KVM Focus Only to a Desired Port
To switch only the KVM focus to a desired port, perform the following command:
1. Activate Hotkey Setting Mode using the aforementioned command.
2. Press and release the number key for the desired port (1, 2, 3 or 4).
3. Press and release the [K] key.
4. Press and release the [Enter] key.
Switching KVM Focus Only to the Next Port
To switch only the KVM focus to the next port, perform the following command:
1. Activate Hotkey Setting Mode using the aforementioned command.
2. Press and release the [K] key.
3. Press and release the [Enter] key.
Switching USB Focus Only to a Desired Port
To switch only the USB focus to a desired port, perform the following command:
1. Activate Hotkey Setting Mode using the aforementioned command.
2. Press and release the number key for the desired port (1, 2, 3 or 4).
3. Press and release the [U] key.
4. Press and release the [Enter] key.
Switching USB Focus Only to the Next Port
To switch only the USB focus to the next port, perform the following command:
1. Activate Hotkey Setting Mode using the aforementioned command.
2. Press and release the [U] key.
3. Press and release the [Enter] key.
201004198 93-2947.indd 11 4/23/2010 3:26:53 PM