Toshiba TDP-SW80 - Manual (Page 27)

53
Operations
52
Using the Wireless Utility (Continued)
■ Displaying a JPEG image saved on a computer via the projector
1 Launch the Wireless Utility software application.
The Screen Image transmission mode window appears on the computer’s screen.
2 Click on the File icon .
The Wireless Utility
window changes to File
transmission mode.
3 Click on the Browse button, and
select the file to send.
Clicking on the Browse button displays the Open
dialog box. Select the file to send, then click on
the Open button.
The selected file is added to the pull-down list in
the Wireless Utility’s Transmission File field.
4 Select the file to be sent from the
pull-down list of the Transmission
File field.
Click on the Transmission File field’s button to
display the pull-down list. Select the file to be sent
from this list.
A thumbnail of the selected file appears in the
Preview box. The file displayed here will be
transmitted.
Step 3 can be skipped.
The way that drag and drop the file to be sent from the desktop or Windows Explorer
into the Preview box is also available. In this case as well, the selected file is added to
the file pull-down list Transmission File field’s.
5 Select the projector to be
transmitted.
The IDs of projectors accessible for
communication will be listed. (If projector name
has been set up already, it is shown instead of
the MAC address.) Select the checkbox of the
projector to be transmitted to from this list.
Then icon
is displayed on the projector’s
screen for few seconds.
It is possible to select up-to four projectors.
6 Click on the button.
The selected file’s image is displayed by the projector.
Note
• Only one file can be sent at a time. To send another file, repeat steps 4 and 6 .
■ Operating the projector
This function can be used with any projector input.
Note, however, that this will not function with a memory PC card.
1 Launch the Wireless Utility software application.
The Screen Image transmission mode window appears on the computer’s screen.
2 Click on the Remote
Control button.
The Remote Control window
appears.
As the Wireless Utility window is
still displayed, you can operate the
projector via the Remote Control
window, while using the Wireless
Utility’s functions.
While it is possible to use this function merely to operate the projector, closing the
Wireless Utility also closes the Remote Control window.