Toro Sand Pro 5020 - Manual (Page 79)

Adjust Traction Pedal for Forward (SP 5020)
If the jam nuts on the control rod are loosened or if the
pedal is removed, adjusted traction pedal for forward.
1. Park machine on a level surface and turn engine off.
2. Make sure pump is in neutral.
3. Loosen jam nuts on the control rod.
4. Press down on the forward pad of the pedal until the
pedal rod contacts the footrest. Tighten jam nuts.
1
2
Figure 18
1. Jam nuts 2. Control rod
Sand Pro 2020/3020/5020 Page 4 – 29 Hydraulic System (Rev. A)
Hydraulic Systems