Maintenance work order, Date, Ab c d other – Toro Sand Pro 5020 User Manual
Page 20: Maintenance supervisor w ork order

________________________________
________________________________
________________________________
________________________________
_______________________________
_______________________________
________________________________
________________________________
_______________________________
_______________________________
_______________________________
_______________________________
_______________________________
_______________________________
_______________________________
_______________________________
_______________________________
_______________________________
_______________________________
_______________________________
_______________________________
_______________________________
_______________________________
_______________________________
_______________________________
_______________________________
_______________________________
Date: ________________
C – Service (every 400 hours)
Change Hydraulic Oil
Replace Hydraulic Oil Filter
Replace Remote
Air Cleaner Element
Replace Engine
Air Cleaner Element
A
and B – Sevice required
Sand Pro
2020/3020/5020
R
Unit Designation:
Hours:
__________________–__________________
Service to perform (circle):
A
B C D Other
Remarks:
A– Service (every 25 hours)
B – Service (every 100 hours)
D – Service (every 800 houurs)
Check Battery Fluid Level
Check Battery Cable Connections
Change Engine Oil
Replace Engine Oil Filter
Replace Spark Plugs
Replace Fuel Filter
(Duplicate this page for routine use.)
A, B, and C – Sevice required
Replace Moving Hoses
A, B, C, and D – Service Required
Lubricate Front Wheel Bearing
Check Engine RPM (idle and full throttle)
Decarbonize Combustion Chamber
Lubricate Steering Shaft Grease Fitting
Sand Pro 2020/3020/5020
Page 2 – 10
Product Records and Maintenance
Maintenance Supervisor W
ork Order
T
echnician:
T
ORO I.D. #:
Other –
Annual Service and Specials
Inspect Remote
Air Cleaner Element
A
– Service required
Lubricate
T
raction Control Linkage
Replace
T
raction Interlock (Safety) Switch
Drain and Clean Fuel
T
ank
Adjust V
alves and
T
orque Head Bolts
Inspect Engine
Air Cleaner Element
Check Steering Chain
Adjustment
T
orque Wheel Lug Nuts
(See Operator
’s and Service Manual for specifications and procedures.)