Toro Sand Pro 5020 User Manual
Sand pro, Service manual, Preface

PART NO. 98957SL, Rev. B
Service Manual
Sand Pro
R
2020/3020/5020
Preface
The purpose of this publication is to provide the service
technician with information for troubleshooting, testing,
and repair of major systems and components on the
Sand Pro 2020/3020/5020.
REFER TO THE OPERATOR’S MANUALS FOR OP-
ERATING, MAINTENANCE AND ADJUSTMENT
INSTRUCTIONS. Space is provided in Chapter 2 of this
book to insert the Operator’s Manuals and Parts Cata-
logs for your machine. Replacement Operator’s Manu-
als are available by sending complete Model and Serial
Number to:
The Toro Company
8111 Lyndale Avenue South
Bloomington, MN 55420–1196
The Toro Company reserves the right to change product
specifications or this publication without notice.
or CAUTION, PERSONAL SAFETY INSTRUC-
This safety symbol means DANGER, WARNING,
TION. When you see this symbol, carefully read
the instructions that follow. Failure to obey the
instructions may result in personal injury.
NOTE: A NOTE will give general information about the
correct operation, maintenance, service, testing, or re-
pair of the machine.
IMPORTANT: The IMPORTANT notice will give im-
portant instructions which must be followed to pre-
vent damage to systems or components on the
machine.
E The Toro Company – 1998, 2003, 2006
Document Outline
- Preface
- Table of Contents
- 1 - Safety
- 2 - Product Records and Maintenance
- 3 - Engine
- Table of Contents
- Introduction
- Specifications
- General Information
- Adjustments
- Service and Repairs
- Change Engine Oil and Filter
- Air Cleaner
- Remote Air Cleaner
- Throttle and Choke Controls
- Replace Fuel Filter
- Remote Air Cleaner (SP 2020/3020)
- Remote Air Cleaner (SP 5020)
- Muffler (SP 5020)
- Muffler (SP 2020/3020)
- Fuel Tank (SP 2020/3020)
- Fuel Tank (SP 5020)
- Engine (SP 2020/3020)
- Replace Spark Plugs
- Engine (SP 5020)
- Clean Cylinder Head Fins
- Briggs & Stratton Engine
- 4 - Hydraulic System
- Table of Contents
- Specifications
- General Information
- Hydraulic Schematics
- Hydraulic Flow Diagrams
- Special Tools
- Troubleshooting
- Testing
- Adjustments
- Service and Repairs
- Check Hydraulic Lines and Hoses
- Charge Hydraulic System
- Change Hydraulic System Fluid and Filter
- Lift Valve (SP 2020/3020)
- Lift Valve (SP 5020)
- Lift Valve
- Lift Cylinder (SP 2020/3020)
- Lift Cylinder(SP 5020)
- Lift Cylinder Service
- Hydrostat (SP 2020/3020)
- Hydrostat (SP 5020)
- Flush Hydraulic System
- Hydrostat Service
- Front Wheel Motor
- Rear Wheel Motors (SP 2020/3020)
- Rear Wheel Motors (SP 5020)
- Wheel Motor Service
- Hydraulic Tank (SP 2020/3020)
- Hydraulic Oil Cooler (SP 2020/3020)
- Hydraulic Tank and Oil Cooler (SP 5020)
- 5 - Electrical System
- 6 - Wheels, Brakes and Misc.
- Table of Contents
- Specifications
- Adjustments
- Service and Repairs
- Seat (SP 2020/3020)
- Front Wheel (SP 2020)
- Front Wheel (SP 3020 and SP 5020)
- Rear Wheels and Brakes
- Brake Linkages (SP 2020/3020)
- Brake Linkages (SP 5020)
- Front Fork and Steering (SP 2020 and Older SP 3020 Models)
- Front Fork and Steering (Newer SP 3020 Models)
- Seat (SP 5020)
- Steering (SP 5020)
- Front Fork (SP 5020)
- Hood and Dash Panel (SP 2020/3020)
- Fenders (SP 5020)