Toshiba Parallel Port Flash Card Reader - Manual (Page 20)

20
Using The CameraConnect Pro Utility
When you load the CameraConnect Pro Drivers in Windows 95 or Windows 98, a
utility program is also installed. This utility provides some useful information about
the CameraConnect Pro’s installation parameters and the status of any cards which
are installed in it.
The CameraConnect Pro Utility can be started from Programs menu. On the Start
menu, click Programs, click CameraConnect Pro, then click CameraConnect Utility.
The utility will display the dialog box shown below.
Figure 9: The CameraConnect Utility Screen
Three sections of information are provided in the utility’s dialog box. The first block
gives PC Parallel Port detection information. The port address indicates which LPT
Port the CameraConnect Pro is connected to. The default LPT addresses are listed
below.
0x378 LPT1:
0x278 LPT2:
0x3BC LPT3: