Toshiba Color Television 36A11 - Manual (Page 9)

3
Ref
er
ence
W
elcome to Toshiba
Connecting
y
our T
V
Using the
Remote Contr
ol
Setting up
y
our T
V
Using the T
V
’s
F
eatur
es
Appendix
Index
Connecting a cable converter box
This connection allows you to watch cable and premium channels.
You should keep your TV selected to ANT-1 so that you can use the
TV features. When viewing premium channels, select ANT-2 and
tune the TV to channel 3 or 4 (whichever channel is vacant in your
area), then use the converter box to change channels.
You will need two coaxial cables.
ANT-1 OUT
ANT (75 Ω )
ANT-2
IN OUT DVD IN
VIDEO COLOR
STREAM
INPUT VIDEO 2 VIDEO 1
MONO L/MONO
VIDEO
S VIDEO
L
R
AUDIO
L
R
AUDIO
R
AUDIO
Y
Cb
Cr
From Cable
cable converter box
IN OUT
Connecting a cable converter box and a VCR
This connection allows you to watch and record basic and premium
cable channels, as well as watch videotapes. Change the TV to video
mode. Tune the VCR to channel 3 or 4 (the same channel as the cable
box output switch). Use the cable convertor box to change channels.
The PIP source should be set to TV mode. (see page 24)
You will need:
• three coaxial cables
• one pair of audio cables (only one cable for a mono VCR)
• one video cable
• cable splitter
Caution:
If you have a mono VCR, connect L/Mono to
VCR Audio OUT using only one audio cable.
If you have a S-VHS VCR, use the S-video
connections and remove the video cable. Do
not connect the video cable and the
S-video cable to Video-1 simultaneously.
ANT-1 OUT
ANT (75 Ω )
ANT-2
IN OUT DVD IN
VIDEO COLOR
STREAM
INPUT VIDEO 2 VIDEO 1
MONO L/MONO
S VIDEO
L
R
AUDIO
L
R
AUDIO
R
AUDIO
Y
Cb
Cr
Stereo VCR
VIDEO AUDIO
OUT
IN from ANT
CH 3
CH 4
OUT to TV
L R
IN
TV
VIDEO
cable converter box
IN OUT
cable splitter
IN
OUT OUT
From Cable