Video lock, Ref er ence – Toshiba Color Television 36A11 User Manual
Page 27
21
Ref
er
ence
W
elcome to
Toshiba
Connecting
y
our T
V
Using the
Remote Contr
ol
Setting up
y
our T
V
Using the T
V
’s
F
eatur
es
Appendix
Index
7. Repeat steps 1 through 7 to block other channels. When you are
finished blocking channels, press EXIT to return to normal
viewing.
If you try to display a blocked channel, the TV will not display it, but
will display the nearest unblocked channel.
To unblock channels:
1. Press MENU, then press
x
or
•
to highlight the SET UP menu.
2. Press
y
or
z
to highlight V-CHIP and then press
x
or
•
to
display the V-CHIP menu.
3. Use the Channel Number buttons (0-9) to enter your PIN code.
If you are accessing the V-Chip menus for the first time, choose a
four-digit number to be your PIN code. Wait 2 seconds for the
BLOCKING menu to appear.
4. Press
y
or
z
to highlight BLOCK CHANNEL and then press
x
or
•
to display the BLOCK CHANNEL menu.
5. Press
x
or
•
to highlight CLEAR and clear all channels from the
list of blocked channels. Press
y
or
z
.
6. Press EXIT to return to normal viewing.
Video Lock
Video locks allow the user to lock out the input sources (Video 1,
Video 2, ColorStream) and channels 3 and 4.
The possible options are listed below:
Video: This option blocks out Video 1, Video 2 and ColorStream
Video+: This option blocks out Video 1, Video 2, ColorStream,
channels 3 and 4
Off:
Disables the video lock feature
Note:
In normal TV viewing, if you cannot access the input
sources (Video 1, Video 2, ColorStream, Channel 3 or 4)
please check that this feature has been disabled.
To setup the video lock, follow the steps below:
1. Press the MENU button. Press
x
or
•
to select SETUP.
2. Press
y
or
z
to select the “V-Chip Control” menu item.
BLOCKING IS ACTIVE
PIN CODE
- - - -
AUDIO
PREFER
SET UP
C.CAPT
SELECT [0-9] END[EXIT]
PICTURE
3. Press
x
or
•
to activate the menu. At the prompt, enter the
correct pin code number to access the V-Chip control menu. See
the section on “V-Chip control” on steps for entering the pin
code number. (pag e16)
4. If the correct pin code has been entered, press
y
or
z
to select the
menu item “Video Lock.”
Note:
After programming BLOCK CHANNEL,
change channels before turning off the
television.
CH RTN
CH
VOL
VOL
CH
EXIT
MUTE
RECALL
POWER
Channel
Number
ENT
1
4
7
2
5
8
3
6
9
0
100
TV
CABLE
VCR
MENU/
ENTER
Menu/Enter
Exit