Setting up your tv, Selecting the antenna input, Changing the on-screen display language – Toshiba Color Television 36A11 User Manual
Page 18: Setting up y our t v, Using the tv/video button, Until the set up menu appears, Press
Setting up
y
our T
V
12
Setting up your TV
After you’ve installed the batteries and programmed the remote
control, you need to set some preferences on the TV using the menu.
You can access the menu with the buttons on your TV or by using the
remote control.
• When you make a menu selection, your changes occur immediately.
You do not have to press MENU or EXIT to see your changes.
• After fifteen seconds, the menu screen will automatically disappear if
you do not make a selection. Your changes will still be saved.
• When you are finished programming the menus, press EXIT.
Changing the on-screen display language
You can choose from three different languages (English, French and
Spanish) for the on-screen displays. Adjustment menus and messages
will appear in the language of your choice.
To select a language:
1. Press MENU, then press
x
or
•
until the SET UP menu appears.
LANGUAGE:
ANT1/2:
TV/CABLE:
CH PROGRAM
MORE
SELECT[ ]
[ENGLISH]FRANCAIS
ESPANOL
[ANT1]ANT2
[TV]CABLE
ADD/ERASE:
[ADD]ERASE
AUDIO
PREFER
SET UP
C.CAPT
PICTURE
ANT1/2:
TV/CABLE:
PROGRAMME CAN
MORE
BOUGER[ ] CHOISIR[ ]
ENGLISH[FRANCAIS]
ESPANOL
[ANT1]ANT2
[TV]CABLE
ADD/EFF:
[ADD]EFF
AUDIO
PREFER
SET UP
C.CAPT
PICTURE
LANGUAGE:
2. Press
y
or
z
to highlight LANGUAGE.
3. Press
x
or
•
to highlight your desired language.
Selecting the antenna input
You can connect to two different signal sources by choosing the
antenna input (ANT 1 or ANT 2).
To select the antenna input:
1. Press MENU, then use
x
or
•
to highlight the SET UP menu.
2. Press
y
or
z
to highlight ANT 1/2.
LANGUAGE:
ANT1/2:
TV/CABLE:
CH PROGRAM
MORE
SELECT[ ]
[ENGLISH]FRANCAIS
ESPANOL
[ANT1]ANT2
[TV]CABLE
ADD/ERASE:
[ADD]ERASE
AUDIO
PREFER
SET UP
C.CAPT
PICTURE
3. Press
x
or
•
to highlight either ANT 1 or ANT 2, depending on
the antenna terminal you wish to use.
Using the TV/VIDEO button
You can monitor or change the signal source that is connected to the TV.
By pressing the TV/VIDEO button on your TV, you can select the
VIDEO 1, VIDEO 2, ColorStream, ANT 1 or ANT 2 mode. The signal
source you are currently connected to will be displayed in purple.
CH RTN
CH
VOL
VOL
CH
EXIT
MUTE
RECALL
POWER
ENT
1
4
7
2
5
8
3
6
9
0
100
Menu/Enter
TV
CABLE
VCR
MENU/
ENTER
Exit
T
/
S
/
t
/
s
TV/VIDEO
VOLUME
T
/
S
CHANNEL
s
/
t
VOLUME
CHANNEL
T
S
t
s
TV/VIDEO
MENU
MENU