Lamp replacement (continued) – Toshiba TDP-P9 User Manual

Page 43

intenanc

Lamp replacement (Continued)

Unplug power cord.

Wait until lamp is sufficiently cooled.

Wait for at least 1 hour.

Remove the lamp cover.

Loosen the screw, raise the lamp

! cover with your

fingers as shown to remove the lamp cover. Use
care to avoid any

!damage to nails and/or tip of your

finger(s). If

! you have any difficulty in removal, you

can use

!a screwdriver or any other smaller tool for

your

!convenience.

Pull out the lamp.

Loosen the two lamp locking screws, pull up the
handle, and remove the lamp.

Mount the new lamp.

Align the orientation, press down the new lamp
until the bottom is reached, and lock in place using
the two lamp locking screws.

Replace the lamp cover.

Align the cover, and press it in, then tighten the

!screw loosened in step

until the lamp

cover is no longer loose. (Be sure to replace the lamp cover.)

Reset the lamp timer.

See the lamp's manual for instructions on resetting

!the lamp timer.

Lamp cover