Icture output s-video – Technicolor - Thomson Thomson Scenium DTH4500 User Manual
Page 21
21
GB
GB
P
icture output S-Video
S-VIDEO OUT
VIDEO OUT
VIDEO IN
S-VIDEO IN
S-VIDEO OUT
S-VIDEO IN
TV
7
Amplifier
DVD Player
S-VIDEO OUT
VIDEO OUT
VIDEO IN
S-VIDEO IN
S-VIDEO OUT
S-VIDEO IN
TV
1
Amplifier
DVD Player
S-Video link between the DVD player and an amplifier
In order to link your DVD player up to an S-Video compatible Home Cinema system, you will need
to enable S-Video output through the Scart and S-Video (Hosiden) sockets, and change the factory
settings of the Scart output of your DVD player from RGB to S-Video, by following steps 1 to 7
below in the Display Options menu.
Connecting the unit
Configuring the DVD player to S-Video
Final connections
1
- Connect the DVD player (video out) to the
amplifier (video in) via the twin yellow plugs of
the Audio/Video Cinch/Cinch cable supplied with
the DVD player.
2
- Call up the MAIN MENU with the
menu
key
(
19
)
on the remote control.
3
- Select Display Options by pressing
7
(
24
).
4
- Select SCART Output by pressing
7
(
24
).
5 -
Select S-Video
using the arrow keys
(
18
,
16
).
6 -
Press
return
(
20
) twice to leave the menus.
7
- Unplug the Cinch-Cinch cable (see Step 1 above)
and connect the DVD player to the amplifier by
means of an S-Video cable (not supplied).
DISPLAY OPTIONS
1 Screen Format
4x3 PS
2 Still State
Auto
3 On Screen Messages
On
4 Display Brightness
Auto Dim
5 Black Level
Normal
6 NTSC disc Output
PAL 60Hz
7 SCART Output
C
CB
B
Video
RETURN
OK
im
RR
✔
DTH4500-GB 7/09/00 13:34 Page 21